Upgrade your racing Subaru WRX 2015+ FA20 engines with Kelford 280°/286° Cams Perfect for high-power and high-rpm performances, 500+ horsepower – ideal for intense applications such as drag or roll racing. They are designed to meet the needs of a 58mm+ turbo, but keep in mind that a valve spring upgrade is required for installation.
For the best upgrade experience, Kelford Cams recommends the KVS87-DT valve spring upgrade.
- Don’t forget to note that you should verify the piston to valve clearance before making your decision.
Subaru FA20F
SUBARU
WRX FA20F CAMSHAFTS
View Kelford Cams Range
264-EZ | 262°/264° 11.40mm/11.40mm Valve Lift
Easy power drop-in cams. Designed to work with stock valve springs on near stock engines. Good upgrade in power across the entire rpm range, keeping almost OEM response. To suit stock turbo or turbo upgrade 48-54mm. Must retain stock RPM limit if OEM spring is used.
264-A | 272°/276° 11.60mm/11.60mm Valve Lift
272° performance cams to suit most motorsport applications. Designed for 450hp-600hp FA20F engine with a 48-58mm turbo. Requires valve spring upgrade. Kelford Cams recommend KVS87-DT. Piston to valve clearance must be checked.
264-B | 280°/286° 11.80mm/11.80mm Valve Lift
280°/286° cams for high power, high rpm racing FA20F engines making 500hp+. Ideal for applications such as as drag or roll racing where wide open throttle power is most important. To suit 58mm+ turbo. Requires valve spring upgrade. Kelford Cams recommend KVS87-DT. Piston to Valve clearance must be checked.