- How to Make a Camshaft!
- How Important is a Camshaft?
- How to Select The Right Camshaft?
- Sole Purpose of Degreeing Your Cams
- How to Degree Your Camshafts?
- Flat Tappet Break In Procedure
- How to Determine Valve Lash?
- Discover the Spintron
- DLC Cam Follower
- Valve Guide
- Valve Spring Designs
- OEM vs Adjustable Gears
- Why Upgrade a Cam Gear?
- Mitsubishi Lancer Evolution
- Jimmy Oakes 2JZ Head Upgrade
- Extreme Racing
EVO 4-7 Solid Lifter
260/264 | Solid Lifter EVO 4-7
SKU:
4-SLX260
NZD $895.00260° cams to suit 32-40mm restrictor plate and GPA rally engines. Good throttle response. 48-58mm turbo. Not for OEM hydraulic lifters, must convert to solid lifter.
272/274 | Solid Lifter EVO 4-7
SKU:
4-SLX272
NZD $895.00272° The best all round performing motorsport cams. Suits racing engines in the 400-700hp range. 54-64mm turbo size range. Not for OEM hydraulic lifters, must convert to solid lifter.
282/288 | Solid Lifter EVO 4-7
SKU:
4-SLX282
NZD $895.00282° high HP racing cams to suit well built time attack and drag racing engines. Suits 700hp+ 62mm+ turbo. Great with E85 and similar ethanol blend fuels. Not for OEM hydraulic
294/300 | Solid Lifter EVO 4-7
SKU:
4-SLX294
NZD $895.00294° drag racing cams for extreme boost and high RPM engines. Turbo sizing 76mm+. Fuel type ethanol blend or methanol. Not for OEM hydraulic lifters, must convert to solid lifter.
KCG63 | 4G63 Cam Gears
SKU:
KCG63
NZD $529.00Enhance your engine tuning with Kelford Cams' adjustable cam gears for Mitsubishi 4G63 DOHC engines. Promote extended belt lifespan
4G63 Balance Shaft Delete Kit
SKU:
KBS63
NZD $320.00Designed specifically for 4G63 Engines: Key Features: Precision machined EN30b steel, Ground bearing surfaces to under 7Ra, Nitreg+ONC black Nitride Surface hardening for extreme durability.
KVS63-BTK-X | 4G63 Valve Springs
SKU:
KVS63-BTK-X
NZD $842.004G63 DOHC EVO 1-9. PACALOY™ Premium Endurance Beehive Valve Spring and Titanium Retainer Set. Suits high RPM, high boost competition engines. Install at 90lb. Maximum valve lift is 13.50mm.
KVS63-EXTREME | 4G63 Beehive Springs
SKU:
KVS63-EXTREME
NZD $795.00Ultimate Valve Spring and Retainer Kit for Drag Racing 4G63 engine. Designed for 1650+HP applications, 11,000+RPM.142lb on the Seat, 292lb open. PAC Racing High Frequency Beehive. Huge 14mm to
KVS63-BTK | 4G63 Beehive Springs
SKU:
KVS63-BTK
NZD $783.004G63 DOHC EVO 1-9. Beehive spring and Titanium retainer set. Suits high RPM, high boost competition engines. 85lb@39mm/ [email protected] lift
VG63E-8 | 4G63 Exhaust Valve Guides
SKU:
VG63E-8
NZD $128.00Exhaust valve guide for Mitsubishi 4G63 DOHC. OD: 12.06mm. ID: 6.55mm. Set of 8. High quality precision machined.
