ALL MOTOR B16A/B18C drag racing cams for extreme NA engines making 250hp-300hp+. Cylinder head modifications are required to avoid valve to valve contact. Ideal for big bore and long stroke engines. Fuel type race fuel, ethanol blend or methanol.
Kelford Cams recommend KVS18-K valve spring and retainer kit when running this cam.

B16A-B16C VTEC CAMSHAFTS
View the Kelford Cams Range
The ultimate NA stage 1 performance cams for B16A and B18C. Still maintains good street drivability and mild idle off-VTEC. The 176-B VTEC lobes open up top end power in the 5.5k-9.5k rpm range for track use or spirited driving. Improved mid-range and high rpm power over OEM Type R cams. Must have tunable ECU, intake (such as a whale penis) and exhaust system upgrades. OEM intake manifold can still be used. Requires valve spring upgrade, Kelford Cams recommend KVS18-K.
Naturally aspirated racing cams for B16A/B18C powered circuit and track cars. Suits engines with high compression, ported cylinder head and good intake and exhaust systems. Large low lobe spec for strong mid-range power. VTEC crossover around 6k rpm depending on engine. VTEC will pull to around 10k rpm depending on engine. Rough idle on plenum manifold. Requires valve spring upgrade, Kelford Cams recommend KVS18-K
ALL MOTOR B16A/B18C drag racing cams for extreme NA engines making 250hp-300hp+. Cylinder head modifications are required to avoid valve to valve contact. Ideal for big bore and long stroke engines. Fuel type race fuel, ethanol blend or methanol. Kelford Cams recommend KVS18-K valve spring and retainer kit when running this cam.
The ultimate street turbo cams to suit 350-600hp B16A/B18C engines. Suits 48-58mm size turbo. Valve timing of primary and VTEC lobes is optimised for turbo setups helping produce a broader power band compared to OEM cams. Still maintains good street drivability and mild idle off-VTEC. The 176-TS VTEC lobes open up top end power in the 5k-9.5k rpm range for track use or spirited driving. Requires valve spring upgrade, Kelford Cams recommend KVS18-K.
Stage 2 turbo cams for B16A and B18C engines making 600-1000hp. Great for track and roll racing. Great with E85. Suits turbo sizing 54-68mm. Primary lobes will crossover to VTEC around 5k rpm, VTEC will pull to around 10k rpm (depending on engine). Still maintains reasonable drivability and mild idle off-VTEC. Requires valve spring upgrade, Kelford Cams recommend KVS18-K.
Pro Import drag racing cams to suit engines making 1200hp-1600hp. Turbo sizing 72mm+. Best suited for alcohol fuels. Can run to 50psi+ boost and 10,500rpm when used with KVS18-K spring kit.