The EVO 2 underwent an upgrade in December 1993 and was in production until February 1995. It comes equipped with a 2.0 L 4G63T I4 Turbocharged Engine. Kelford Cams provides profiles to cater to all motorsport applications including Drag Racing, Time Attack, Street, Rally and more.

Showing 1–10 of 11 results

KVS63-BK | 4G63 Beehive Springs

SKU: KVS63-BK
NZD $649.00

4G63 DOHC Beehive Spring & Base suit stock retainers. Suits high RPM, high boost competition engines. Install at 90lb. Maximum valve lift is 13.50mm.

KVS63 | 4G63 EVO 1-9 Springs

SKU: KVS63
NZD $292.00

PACALOY™ single valve spring set to suit OEM retainer and spring base. 83lb seat pressure at 39.0mm installed height. Coil Bind at 24.0mm.

KCG63 | 4G63 Cam Gears

SKU: KCG63
NZD $529.00

Enhance your engine tuning with Kelford Cams' adjustable cam gears for Mitsubishi 4G63 DOHC engines. Promote extended belt lifespan

4G63 Balance Shaft Delete Kit

SKU: KBS63
NZD $320.00

Designed specifically for 4G63 Engines: Key Features: Precision machined EN30b steel, Ground bearing surfaces to under 7Ra, Nitreg+ONC black Nitride Surface hardening for extreme durability.

KVS63-BTK-X | 4G63 Valve Springs

SKU: KVS63-BTK-X
NZD $842.00

4G63 DOHC EVO 1-9. PACALOY™ Premium Endurance Beehive Valve Spring and Titanium Retainer Set. Suits high RPM, high boost competition engines. Install at 90lb. Maximum valve lift is 13.50mm.

KVS63-EXTREME | 4G63 Beehive Springs

SKU: KVS63-EXTREME
NZD $795.00

Ultimate Valve Spring and Retainer Kit for Drag Racing 4G63 engine. Designed for 1650+HP applications, 11,000+RPM.142lb on the Seat, 292lb open. PAC Racing High Frequency Beehive. Huge 14mm to

KVS63-BTK | 4G63 Beehive Springs

SKU: KVS63-BTK
NZD $783.00

4G63 DOHC EVO 1-9. Beehive spring and Titanium retainer set. Suits high RPM, high boost competition engines. 85lb@39mm/ [email protected] lift

VG63E-8 | 4G63 Exhaust Valve Guides

SKU: VG63E-8
NZD $128.00

Exhaust valve guide for Mitsubishi 4G63 DOHC. OD: 12.06mm. ID: 6.55mm. Set of 8. High quality precision machined.

VG63I-8 | 4G63 Intake Valve Guides

SKU: VG63I-8
NZD $128.00

Intake valve guide for Mitsubishi 4G63 DOHC. OD: 12.06mm. ID: 6.55mm. Set of 8. Made from our own proprietary Manganese Bronze.