- How to Make a Camshaft!
- How Important is a Camshaft?
- How to Select The Right Camshaft?
- Sole Purpose of Degreeing Your Cams
- How to Degree Your Camshafts?
- Flat Tappet Break In Procedure
- How to Determine Valve Lash?
- Discover the Spintron
- DLC Cam Follower
- Valve Guide
- Valve Spring Designs
- OEM vs Adjustable Gears
- Why Upgrade a Cam Gear?
- Mitsubishi Lancer Evolution
- Jimmy Oakes 2JZ Head Upgrade
- Extreme Racing
Rally | EVO X 4B11T
SKU:
214-R
NZD $905.00Engines running 46-54mm turbo. Features split lobe profile design on the intake to promote more efficient swirl chamber filling. Great for street or track engines where excellent throttle response
264/252 | EVO X 4B11T
SKU:
214-A
NZD $905.00264° cams for improved low to mid-range power and good throttle response. Ideal for 54mm-60mm turbos. Can retain OEM valve spring up to stock boost and rpm limit.
270/262 | EVO X 4B11T
SKU:
214-B
NZD $905.00For most motorsport applications. Suits 58mm-66mm turbo running the 350-550hp range. Requires valve spring upgrade.
278/272 | EVO X 4B11T
SKU:
214-C
NZD $905.00Stage 3 278° racing cams to suit high horsepower engines running a 64mm-72mm turbo. Great with E85. Kelford Cams recommend KVS11-BT valve spring upgrade.
282/288 | EVO X 4B11T
SKU:
214-D
NZD $905.00282°/288° Drag Racing Cams for professionally built 4B11T engine with a well prepared cylinder head. Fuel type E85 or methanol. Suits engines running 68mm+ turbo at high boost for 1000hp+.
KVS11 | 4B11T Valve Springs
SKU:
KVS11
NZD $427.00High performance PACALOY™ valve spring set to suit the OEM retainer and spring base. 75lb seat pressure at 35.0mm install height. 175lb at 11.5mm valve lift. Coil bind at 22.0mm.
KVS11-BT | 4B11T Beehive Springs
SKU:
KVS11-BT
NZD $750.00Designed for the serious racer for high rpm, high boost racing applications. Suits up to 10,000rpm and 50psi boost.
VG214-EX-8 | 4B11T Exhaust Valve Guides
SKU:
VG214-EX-8
NZD $111.60Exhaust valve guide. OD: 11.05mm. ID: 5.45mm. Set of 8. High quality precision machined. Made from our own proprietary Manganese Bronze. All guides need honing after fitment.
VG214-IN-8 | 4B11T Intake Valve Guides
SKU:
VG214-IN-8
NZD $111.60Intake - set of 8. OD: 11.05mm. ID: 5.45mm. High quality precision machined. Made from our own proprietary Manganese Bronze. All guides need honing after fitment.
VSI-M5.5V-8 | 4B11T Top Hat 5.5mm Valve Stem Seals
SKU:
VSI-M5.5V-8
NZD $50.40Top Hat - Stem 5.5mm. Guide OD 11mm. 14.7mm and 16.8mm seal OD. Viton. Set of 8 seals, same part number used for both intake and exhaust.
